Specifications

FMS-3 – Performance Specifications

Fetal ECG:
2 direct Fetal ECG channels
1 combined Maternal/Fetal channel
Fetal 1:
  • • 3 Static ECG Rates: 30, 60, 80, 90, 100, 120, 140, 150, 160,180, 200, 210, 240 BPM
  • • 6 Sensitivity Settings: 50, 100, 200, 500, 1000, 2000 μV
  • • 24 Patterns: Normal, Tachy, Brady, Arrhythmia, Sine, Accelerations and Decelerations
  • • 8 Variability Settings
  • • 15 Trends of data representing real-life case studies
  • • 3 Performance Waveforms
Fetal 2:
  • • 6 Static ECG Rates: 60, 80, 100, 140, 160, 200 BPM
  • • 6 Sensitivity Settings: follows Maternal Settings
  • • 6 Patterns with variability
Optional Fetal Mechanical Heart:
Provides a mechanical interface to the fetal monitor’s ultrasound transducer and can be connected to any of the three (3) ultrasound (US) channels.
Ultrasound Simulations:
  • • US-1 tracks Fetal1 ECG rates.
  • • US-2 tracks Fetal2 ECG rates or one of 6 Fetal2 Patterns
  • • US-3 tracks one of 6 Fetal 2 Patterns
Patterns:
  • • Acceleration: Wave #1, Wave #2, Compensatory
  • • Deceleration: Early, Late, Moderate Variability, Severe Variability #1, Severe Variability #2, Prolonged, Biphasic, Exaggerated, Non-uniform, Variability “U”, Variability “V”, Variability High Rate, Variability Post Exaggerated, Variability with Position Changes
  • • Sinusoidal: Large, Small
Maternal ECG:
Rates: Five (5) ECG leads @ 60, 80, 100, 120, 140, 160 BPM
Sensitivity: 0.5mV, 1 mV, 2 mV, 3 mV, 4 mV and 5 mV
Hi Level Output: 0.5V per 1 mV
Uterine/TOCO Activity:
Static levels: -5, 0, 20, 40, 60, 80, 100, 150 and 200 mm Hg
Waveform: 0 – 25, 0 – 40, 0 – 50, 0 – 60, 0 – 80, 0 – 100 mm Hg
Sensitivity: 5 or 40 μV/V/mmHg
TOCO Simulations:
  • • Wave Duration: 40, 80, 90, 110 sec
  • • Respiration artifact: 3 rates plus variable
  • • Baseline wandering: 2 ªPressure and 5 ime settings
  • • Tocodynamometer
  • • Hypotonic Toco amplitude
  • • Picket Fence
  • • Coupling
  • • Tripling
  • • Irregularities
  • • Hypertonic
  • • Hypertonus
  • • ‘V’ Spikes
  • • Elevated Baselines
Physical Characteristics:
Size: 5.5” x 3.6” x 1.3” (14cm x 9.1cm x 3.4cm)
Weight: 11.5 oz. (0.33 kg)
Display: 128 x 64 Graphical LCD, backlit
Operating Temperature: 59°F to 95°F (15°C to 35°C)
Storage Temperature: 32°F to 122°F (0°C to 50°C)
RS-232 Control
Power:
Battery: single 9-volt alkaline battery
Battery eliminator for AC power (required when using optional Fetal Mechanical Heart)

Contact us for a full list of cables and other accessories for the FMS-3.

 

All specifications subject to change without notice.